Filmozercy.com | Forum
madVR ENVY - Wersja do druku

+- Filmozercy.com | Forum (https://forum.filmozercy.com)
+-- Dział: Blu-ray i DVD (https://forum.filmozercy.com/dzial-blu-ray-i-dvd)
+--- Dział: Dział techniczny (https://forum.filmozercy.com/dzial-dzial-techniczny)
+--- Wątek: madVR ENVY (/watek-madvr-envy)



madVR ENVY - prodarek - 20-09-2019

http://madvr.com/EnvyPressRelease.pdf

Hey guys, the press release is out, you can find it here:

http://madVR.com/EnvyPressRelease.pdf

So after much deliberation we decided that it would be best for our new company to carry madVR's motto of "no compromises" into the CE world. As such we will start off with the Envy Pro Cinema aimed at the top-end of the market, and with the Envy base model aimed at the mid to high-end home theater market.

Here are some technical specs and features (subject to change):

- Pro Cinema: about ~13 TFLOPS, plus ~100 TFLOPS for AI / Neural Network
- Base model: about half the computational power of the Pro Cinema
- 32 bit floating point processing (per component), with 16 bit buffers
- 16 bit floating point AI / Neural Network processing (per component)
- One 18.0 Gbps HDMI 2.0 port each for input, output and loop-through
- One 36.4 Gbps DisplayPort 1.4a output port with DSC (Display Stream Compression) support
- Pro Cinema model will get hardware upgrades (at a cost) to keep it up-to-date
- 65 point or 256 point 3D LUT for accurate calibration
- supported by Calman, LightSpace, DisplayCAL/ArgyllCMS via LAN connection
- Integrated SDR and HDR pattern generator
- Support for IR Remote control and IP Control
- Dynamic Tone Mapping with unique Highlight Recovery technology
- AI / Neural Network algorithms for upscaling, mosquito noise reduction etc
- 4K Anamorphic Stretch, using AI / Neural Network scaling
- 4K Debanding & Sharpening
- Automatic Black Bar & Aspect Ratio detection
- Extra features for CIH, CIW and CIA front projection
- Graphical, modern interface that combines flexibility, power and ease of use

I'm very happy that I can finally talk about the Envy, and reply to your questions and comments! If you get a chance to visit our booth at CEDIA to see our working product, please do let me know your impressions. Can't wait to hear what you think! E.g. how do you like the menu etc?

FYI, here's an up-to-date screenshot of the Envy menu:



The "Auto" in the menu is the default mode for some options and tells Envy to decide for itself which it considers the best setting to be, in any given situation.


[Obrazek: EnvyOsd.png]

Cena "Envy Pro Cinema is slated for $9,979 and $5,499 for the Envy base model. The products are
expected to ship in Q4 2019"

Także grubo Big Grin każdy myślał że będzie to coś dla ludzi a tu takie kuku.


RE: madVR ENVY - misfit - 21-09-2019

"Chyba" też odpuszczę Wink

Znając madshiego, że nie idzie na żadne kompromisy spodziewałem się, że cena będzie zabijać. Ciekawe co tam w środku będzie siedziało, zapewne jakiś RTX 2080 Ti.
Mimo wszystko na pewno znajdzie swoich nabywców, szczególnie wśród projektorowiczów.