"Wow, it worked. I managed to jailbreak my Oppo UDP205EU using USB method. It's now running RU and I tried playing an ISO. Thanks for all who contributed...."
"Well, basically it’s your latest upload. But instead of using an original US firmware I replaced it with an original EU firmware. I then used the jailbreak firmware file MAIN20XCN_RU.bin from OPPO203-and_Clones_FREE_JAILBREAK_OPPO65-0131_Noactivation-needed RU_CN_V1.0 download but I named it MAIN20XEU.bin, because that is the name an original EU firmware expects it to be called. And lastly, I changed MAIN20X.bin to MAIN20XEU.bin in the p.sh script in the AutoScript folder.
I then followed installation as mentioned in the pdf manual.
So, as I already posted earlier this method is using a loophole in the firmware upgrading process. The disc tray open/close trick is used to tell you when the AutoScript has replaced the MAIN20X.bin.
The combination of using an original firmware and an AutoScript that replaces the MAIN20X.bin file can be used to load any firmware.
With this method you can most likely revert to an original non jailbreak firmware on an Oppo. Change your Oppo from an US version to an EU version. You can downgrade to an earlier firmware version if that’s what you want."
+
Just installed the RU JB firmware on my Oppo 203 EU version.
Tried an ISO file and the player recognized it.
First of all I would like to thank theaxledentaldj, moremodey01, Thomas Szucs and all the others involved for their hard work, making the Oppo 203 jailbreak firmware possible.
Basically I used the USA.zip archive re-upped by theaxledentaldj (261.7MB) and followed the method discovered and kindly explained by Thomas Szucs.
The steps I followed:
1- On the USA.zip archive I replaced the USA firmware (UDP20X.bin) with the original file downloaded from Oppo EU (latest firmware UDP20XEU.bin).
2- I then copied the jailbreak firmware file MAIN20XCN_RU.bin (thanks moremodey01) from inside the archive "OPPO203-and_Clones_FREE_JAILBREAK_OPPO65-0131_Noactivation-needed RU_CN_V1.0" posted by theaxledentaldj (288.03 MB) and renamed it MAIN20XEU.bin
3- In the AutoScript folder inside the USA.zip archive I edited the p.sh script changing MAIN20X.bin to MAIN20XEU.bin using Notepad++ .
So, in the end I had one folder and two files in my the USB drive:
- The AutoScript folder with AutoScript.TSS and p.sh
- MAIN20XEU
- UDP20XEU.bin
I then proceeded with the installation following the pdf Manual inside the USA.zip archive.
That's it. Please proceed with caution. I will not take any responsibility for bricking your devices.
Thank you once again to all involved for making it possible to jailbreak my Oppo 203
Cała metoda bez pieprzenia się z kablami >>
https://www.avforums.com/threads/the-ultimate-oppo-media-device.2207229/page-141
"Well, basically it’s your latest upload. But instead of using an original US firmware I replaced it with an original EU firmware. I then used the jailbreak firmware file MAIN20XCN_RU.bin from OPPO203-and_Clones_FREE_JAILBREAK_OPPO65-0131_Noactivation-needed RU_CN_V1.0 download but I named it MAIN20XEU.bin, because that is the name an original EU firmware expects it to be called. And lastly, I changed MAIN20X.bin to MAIN20XEU.bin in the p.sh script in the AutoScript folder.
I then followed installation as mentioned in the pdf manual.
So, as I already posted earlier this method is using a loophole in the firmware upgrading process. The disc tray open/close trick is used to tell you when the AutoScript has replaced the MAIN20X.bin.
The combination of using an original firmware and an AutoScript that replaces the MAIN20X.bin file can be used to load any firmware.
With this method you can most likely revert to an original non jailbreak firmware on an Oppo. Change your Oppo from an US version to an EU version. You can downgrade to an earlier firmware version if that’s what you want."
+
Just installed the RU JB firmware on my Oppo 203 EU version.
Tried an ISO file and the player recognized it.
First of all I would like to thank theaxledentaldj, moremodey01, Thomas Szucs and all the others involved for their hard work, making the Oppo 203 jailbreak firmware possible.
Basically I used the USA.zip archive re-upped by theaxledentaldj (261.7MB) and followed the method discovered and kindly explained by Thomas Szucs.
The steps I followed:
1- On the USA.zip archive I replaced the USA firmware (UDP20X.bin) with the original file downloaded from Oppo EU (latest firmware UDP20XEU.bin).
2- I then copied the jailbreak firmware file MAIN20XCN_RU.bin (thanks moremodey01) from inside the archive "OPPO203-and_Clones_FREE_JAILBREAK_OPPO65-0131_Noactivation-needed RU_CN_V1.0" posted by theaxledentaldj (288.03 MB) and renamed it MAIN20XEU.bin
3- In the AutoScript folder inside the USA.zip archive I edited the p.sh script changing MAIN20X.bin to MAIN20XEU.bin using Notepad++ .
So, in the end I had one folder and two files in my the USB drive:
- The AutoScript folder with AutoScript.TSS and p.sh
- MAIN20XEU
- UDP20XEU.bin
I then proceeded with the installation following the pdf Manual inside the USA.zip archive.
That's it. Please proceed with caution. I will not take any responsibility for bricking your devices.
Thank you once again to all involved for making it possible to jailbreak my Oppo 203
Cała metoda bez pieprzenia się z kablami >>
https://www.avforums.com/threads/the-ultimate-oppo-media-device.2207229/page-141