18-10-2020, 13:07
Faktycznie post z softem i info zostało zaktualizowane wcześniej tego nie było.
New:
For those who have an Oppo UDP-203 USA model and thanks goes to Thomas Szucs for this,
you can switch out the MAIN20X.bin and use moremodey1 MAIN20X_RU.bin to do one simple firmware update process. If you have a Euro Model UDP-205 for example, you would obtain the EU Official Oppo 65-0131 firmware, and rename some of the expected files, like MAIN20X_RU.bin to MAIN20XEU.bin and change the p.sh autoscript to take that file name and it will copy it into the Oppo Nand for the firmware update process. With this AutoScript trick of using any Jailbreak firmware to do the firmware update, you no longer need the use of the Mtktool and TTL-USB device.
I've have done the file switching and renaming already in the below folder.
Make sure to choose the correct package for your model Oppo-203. (USA, EU, or China). Each package uses the Russian Jailbroken firmware 65-0131.
I have removed the moremodey1 MAIN20XCN_CN.bin file from each package as it was causing confusion. You also will not need the 0022DE85E6AC.da1 file as its tied to my Oppos MAC address and this Activation file is no longer needed since moremodey1 has made the firmware Never needing to be Activated. It IS already fully activated and Jailbroken.
For those who run into issues and just
want to go back to the Original USA official firmware, Ive included a package for Original Russian to Original USA 65-0131 firmware. It is the same AutoScript trick method, except I renamed the USA MAIN20X.bin to MAIN20XRU.bin and updated the p.sh AutoScript to switch
the file correctly. I havent tested this. Technically, it should work because AutoScript comes enabled on any Original firmware.
Oppo-203_Models Folder USA, EU, China:
https://mega.nz/folder/QdgWzLgY#Rzh5ZuygJHxeLKJweXSqDA
IMPORTANT: The player will not work properly at all unless a FULL FACTORY RESET is done after the update.
Please make sure you do carry out this procedure after updating firmware on your OPPO player.
(You can backup your settings to a blank USB stick before you do a factory reset to retain your customised settings and then use the restore option after you have performed a factory reset - backup/restore option is on the setup -> device menu on the player)
New:
For those who have an Oppo UDP-203 USA model and thanks goes to Thomas Szucs for this,
you can switch out the MAIN20X.bin and use moremodey1 MAIN20X_RU.bin to do one simple firmware update process. If you have a Euro Model UDP-205 for example, you would obtain the EU Official Oppo 65-0131 firmware, and rename some of the expected files, like MAIN20X_RU.bin to MAIN20XEU.bin and change the p.sh autoscript to take that file name and it will copy it into the Oppo Nand for the firmware update process. With this AutoScript trick of using any Jailbreak firmware to do the firmware update, you no longer need the use of the Mtktool and TTL-USB device.
I've have done the file switching and renaming already in the below folder.
Make sure to choose the correct package for your model Oppo-203. (USA, EU, or China). Each package uses the Russian Jailbroken firmware 65-0131.
I have removed the moremodey1 MAIN20XCN_CN.bin file from each package as it was causing confusion. You also will not need the 0022DE85E6AC.da1 file as its tied to my Oppos MAC address and this Activation file is no longer needed since moremodey1 has made the firmware Never needing to be Activated. It IS already fully activated and Jailbroken.
For those who run into issues and just
want to go back to the Original USA official firmware, Ive included a package for Original Russian to Original USA 65-0131 firmware. It is the same AutoScript trick method, except I renamed the USA MAIN20X.bin to MAIN20XRU.bin and updated the p.sh AutoScript to switch
the file correctly. I havent tested this. Technically, it should work because AutoScript comes enabled on any Original firmware.
Oppo-203_Models Folder USA, EU, China:
https://mega.nz/folder/QdgWzLgY#Rzh5ZuygJHxeLKJweXSqDA
IMPORTANT: The player will not work properly at all unless a FULL FACTORY RESET is done after the update.
Please make sure you do carry out this procedure after updating firmware on your OPPO player.
(You can backup your settings to a blank USB stick before you do a factory reset to retain your customised settings and then use the restore option after you have performed a factory reset - backup/restore option is on the setup -> device menu on the player)
* Oppo 105D, Panasonic UB824/424, Apple TV 4K
* Panasonic S-VHS NV-HS960, Pioneer DVR-560
Oppo 10X / 20X - Automatyczne zarządzanie napisami do płyt
* Panasonic S-VHS NV-HS960, Pioneer DVR-560
Oppo 10X / 20X - Automatyczne zarządzanie napisami do płyt